Skip to content
INGENIERÍA MVH ILUMINACIÓN Y SST S.A.S. · Home
Solutions
All solutionsEngineering servicesOccupational safety and healthLuminaire catalogueCompare luminaires
SectorsLearn with lightAbout usContactSearch
Language · EN
EspañolEnglishPortuguês
← Navigation lights

Choose a navigation light

Identify the light you need on board. Compare its position, colour and arc, then ask about power supply, mounting or type approval.

StarboardPortSternMastheadAt anchor
Bow ↑
Stern

Starboard · Green

112.5° horizontal arc

From the bow along the right-hand side to 22.5° abaft the starboard beam.

The MVH-NAV-001 data sheet specifies 3 nautical miles for vessels of 50 m or more. Its input is 100–240 V AC. The 12–24 V DC rating is the driver output. View specifications MVH-NAV-001 →

What do you need to confirm?

Onboard power supply ↗Mounting drawing ↗Type approval ↗
Bow ↑
Stern

Port · Red

112.5° horizontal arc

From the bow along the left-hand side to 22.5° abaft the port beam.

The commercial model needs confirmation. MVH can review a variant for this function using the vessel length, available power supply and flag or class requirements.

What do you need to confirm?

Onboard power supply ↗Mounting drawing ↗Type approval ↗
Bow ↑
Stern

Stern · White

135° horizontal arc

The sternlight covers 67.5° on either side of the direction directly astern.

The commercial model needs confirmation. MVH can review a variant for this function using the vessel length, available power supply and flag or class requirements.

What do you need to confirm?

Onboard power supply ↗Mounting drawing ↗Type approval ↗
Bow ↑
Stern

Masthead · White

225° horizontal arc

It faces forward and extends to 22.5° abaft the beam on each side.

The commercial model needs confirmation. MVH can review a variant for this function using the vessel length, available power supply and flag or class requirements.

What do you need to confirm?

Onboard power supply ↗Mounting drawing ↗Type approval ↗
Bow ↑
Stern
SternBow
Example in side view

At anchor · White

360° horizontal arc

During ordinary anchoring at night, the white anchor light must be visible from every bearing. Choose the vessel’s length to see how the lights are arranged.

Under 7 m

The anchoring location matters. Rule 30(e) allows an exemption when the vessel is neither in nor near a narrow channel, fairway, anchorage or an area where other vessels normally navigate. Elsewhere a single all-round white light may be shown where it is most visible.

7 to under 50 m

A single all-round white light may be used where it is most visible. Check whether the mast or superstructure obscures it from any direction.

50 to under 100 m

Two all-round white lights are required. One is forward. The other is at or near the stern, lower than the forward light.

100 m or more

Two all-round white lights are required, with the aft light lower than the forward light. Available working lights or their equivalents must also illuminate the decks.

Read COLREG Rule 30 (PDF, p. 90) Practise an anchor watch →

MVH can review the required range, mounting and documentation for the vessel. A commercial model has yet to be confirmed.

What do you need to confirm?

Review the layout on board ↗Onboard power supply ↗Mounting drawing ↗Type approval ↗
Practise recognising the lights from another vessel → Sectors under COLREG Rule 21 (BOE, Spanish)
INGENIERÍA MVH ILUMINACIÓN Y SST S.A.S.

Bogotá D. C., Medellín and Tumaco, Colombia

Luminaire sales across the AmericasColombian tax ID (NIT) 902.119.479-9
ProjectsDiscuss a projectHow to request a quoteWarranty and support
InformationMVH methodPrivacy and personal dataTerms of use and quotations
Contactmvhingenieria@gmail.comWhatsApp · +57 311 607 7892