← Back to the learning area

Measure light on deck

Two lamps light the same instruction plate, one at a time. Both give the same average reading. Which one leaves a corner poorly lit?

Open the shadow simulator ↓
Two underwater vehicles on the deck of Okeanos Explorer
Deck of Okeanos Explorer

Where would you place the light meter?

At night, a crew member needs to read a vertical instruction plate on deck. Light reaches it from the side. Use the virtual light meter to compare two lighting arrangements using simulated readings.

Sample the four points

Select the four equal-area zones in arrangement A. Switch to arrangement B and repeat at the same positions. The light meter measures the light reaching each point and shows the result in lux (lx).

Virtual light meterSimulated data
Latest reading—

Compare the results

The comparison opens when all eight readings have been recorded.

How to interpret the readings

Each point represents one of four equal-area zones on the same vertical surface. In this exercise, the mean is the sum of the four readings divided by four. Sample uniformity is the minimum divided by that mean. The ratio has no units.

A field assessment defines the task plane, selects representative points and records operating conditions. These four readings illustrate the calculation for a fictional plate.

CIE · Average illuminance · CIE · Illuminance uniformity

Shadows on deck

Move a floodlight between port, stern and starboard. Find out when direct light reaches the line and the winch control.

This plan shows which paths the cargo blocks when viewed from above. To find out how much light reaches the task, also consider mounting height, optics and measurements on deck.

View the 150 W marine floodlight data sheet →