MVH laboratory

Light varies with the sky, the location and the technology.

Experiment with shadows, direct sunlight and overcast skies. Explore light sources and luminaire families.

Educational visualization · on-site measurements are needed for assessment

How far does the shadow reach?

A vertical pole is 1 metre tall. Move the sun above level ground, then see what changes when clouds cover the sky.

Shadow length · 1.73 m

Challenge: make the shadow as long as the pole.

How the model works

The model treats direct rays as parallel. On level ground, shadow length = pole height ÷ tan(sun angle). Under diffuse light, the edge blurs. You choose the sun angle and sky for the exercise.

Light sources

Light sources produce light. The design determines how to use it.

When selecting a source, consider its optics, the task, controls, surroundings, maintenance and life cycle, alongside wattage, apparent color and price.

NaturalDaylightVariable · freely available · bioclimatic

Daylight connects indoor spaces to the outdoors and may save energy. It varies with orientation, time, climate, obstructions and façade design.

  • Check glare and thermal load.
  • Coordinate shading devices and controls.
  • Measure or simulate under defined conditions.
Solid-stateLEDEfficient · controllable · versatile

LED is the dominant technology. Its performance depends on the module, driver, thermal management, optics and manufacturing quality.

  • Check photometry and color temperature.
  • Review color rendering and flicker.
  • Confirm service life and environmental conditions.
Low-pressure dischargeFluorescentLegacy technology · diffuse light · contains mercury

Fluorescent sources remain in existing installations. When replacing them, review ballasts, compatibility, disposal and changes in light distribution.

  • Length or wattage alone cannot establish equivalence.
  • Manage waste and mercury content.
  • Check how the retrofit affects the luminaire.
High intensityHigh-intensity discharge (HID)Large areas · startup time · maintenance

Metal halide, sodium and other technologies remain in use at industrial sites, sports facilities and outdoor locations.

  • Consider startup and restrike times.
  • Check color, lumen depreciation and controls.
  • Compare the optics of the installed luminaire as well as the source.
ThermalHalogen and incandescentExcellent color rendering · low efficacy · heat

These sources may still suit niche applications, though energy use, temperature and service life often limit them.

  • Assess thermal load and contact hazards.
  • Check dimming compatibility before replacing a lamp.
  • Use only when justified by the application.

Before specifying

A data sheet should let you verify your choice.

  • Declared luminous flux, power and efficacy.
  • Spectral distribution, color temperature and color rendering.
  • Flicker, dimming and control compatibility.
  • Service life, lumen depreciation and thermal management.
  • Photobiology, certificates and product traceability.

Luminaires

The luminaire protects the source and controls the distribution of light.

Two luminaires with the same wattage can perform very differently depending on optics, mounting, controls, protection and the space around them.

General indoor lighting

Panels, linear luminaires and downlights

Offices, schools, shops and circulation areas. Light distribution and glare control matter as much as power.

Industrial

High bays and sealed linear luminaires

Selection depends on mounting height, dust, humidity, temperature, vibration, maintenance and the task.

Outdoor

Floodlights, bollards and wall-mounted luminaires

Control distribution, light trespass, light pollution, corrosion and aiming.

Public lighting

Road and pedestrian lighting

Assess geometry, lighting class, surface, uniformity, glare and maintenance as a system.

Localized

Task and precision lighting

It brings light to the work plane. Check for extreme contrasts, shadows and distracting reflections.

Emergency

Self-contained or centrally supplied

Verify function, operating mode, backup duration, signage, testing and maintenance.

Sports

Specialized floodlighting

Assess players, spectators, cameras, trajectories, glare control and operating requirements together.

Special areas

Products certified for the environment

Area classification, temperature, chemical agents or explosion hazards may impose additional requirements.

Selection process

From visual requirements to a verifiable specification.

  1. 01NeedWhat needs to be seen, produced, traversed or protected.
  2. 02EnvironmentHeight, mounting, dust, water, heat, corrosion and access.
  3. 03OpticsDistribution, uniformity, shadows, contrast and glare.
  4. 04OperationsSchedule, controls, energy, maintenance and contingency plans.
  5. 05EvidencePhotometry, certificates, drawings, design calculations and final verification.

Classifications to recognize

Mounting, distribution and protection address different questions.

A luminaire can be classified by installation, use, optics, protection rating, electrical class, controls, source or environment. A single label cannot establish suitability.

  • Recessed, surface-mounted, suspended, wall-mounted, pole-mounted or in-ground.
  • Direct, indirect, symmetrical, asymmetrical, wide-beam or narrow-beam.
  • Indoor, outdoor, road, industrial, sports, emergency or special-purpose.
  • Protection against ingress, impact, corrosion and electrical hazards.

Define the scope of your project

Need to assess, design or compare a lighting solution?

MVH reviews the need, actual conditions and evidence before recommending an intervention.